Re: [PATCH 5/6] arm64: tegra: Add node for the GB10B GPU on Tegra264

From: Thierry Reding

Date: Tue Nov 17 2026 - 07:17:33 EST


On Thu, Oct 29, 2026 at 12:32:07PM +0900, Mikko Perttunen wrote:
> While the integrated GB10B GPU on Tegra264 is on the PCI bus, it
> requires a BPMP power domain to be enabled or it won't enumerate on the
> bus. Therefore, describe it and the power domain in the device tree to
> allow the power domain to be enabled prior to enumeration.
>
> Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/nvidia/tegra264.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
> index 5ab34cd09a3d..4c8b320ecc40 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
> @@ -3597,6 +3597,12 @@ pcie@0 {
> #address-cells = <3>;
> #size-cells = <2>;
> ranges;
> +
> + gpu@0 {
> + compatible = "pci10de,2b00";
> + reg = <0x00010000 0x0 0x0 0x0 0x0>;
> + power-domains = <&bpmp TEGRA264_POWER_DOMAIN_GPU>;
> + };

My understanding is that the GPU is the only device on this PCI bus, so
wouldn't it be simpler to add the power-domains property to the bus' DT
node? I guess that's just another interpretation of how this hardware
works, and I like how this power control for PCI devices allows
individual devices to be turned on before the bus probes (there's a case
like this on Jetson Nano where Ethernet needs a GPIO pin to be pulled up
in order to start enumerating on the PCI bus, though I don't remember
how we ended up solving that, sources don't have any indication of that
GPIO being permanently set high or something).

Thierry

Attachment: signature.asc
Description: PGP signature