[PATCH v1 11/11] arm64: dts: qcom: sm8250-lge-timelm: add QCA6390 Bluetooth

From: rofikkerneldev

Date: Tue Nov 17 2026 - 07:41:30 EST


Describe the QCA6390 power sequencer and its PMU regulators. Enable the
Bluetooth HCI controller on GENI UART6 with the supplies provided by the
PMU.

Signed-off-by: rofikkerneldev <rofikcoga@xxxxxxxxx>
---
.../arm64/boot/dts/qcom/sm8250-lge-timelm.dts | 92 +++++++++++++++++++
1 file changed, 92 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-lge-timelm.dts b/arch/arm64/boot/dts/qcom/sm8250-lge-timelm.dts
index 6b57c658cf918..38816268fcf53 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-lge-timelm.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-lge-timelm.dts
@@ -95,6 +95,67 @@ key-assistant {
};
};

+ qca6390-pmu {
+ compatible = "qcom,qca6390-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+ vddaon-supply = <&vreg_s6a_0p6>;
+ vddpmu-supply = <&vreg_s6a_0p6>;
+ vddrfa0p95-supply = <&vreg_s6a_0p6>;
+ vddrfa1p3-supply = <&vreg_s8c_1p2>;
+ vddrfa1p9-supply = <&vreg_s5a_1p9>;
+ vddpcie1p3-supply = <&vreg_s8c_1p2>;
+ vddpcie1p9-supply = <&vreg_s5a_1p9>;
+ vddio-supply = <&vreg_s4a_1p8>;
+
+ wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+
reserved-memory {
ramoops: ramoops@b0000000 {
compatible = "ramoops";
@@ -506,6 +567,21 @@ &uart12 {
status = "okay";
};

+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,qca6390-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
&ufs_mem_hc {
status = "okay";

@@ -636,6 +712,22 @@ touchscreen@28 {
};

&tlmm {
+ bt_en_state: bt-enable-state {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ wlan_en_state: wlan-enable-state {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ output-low;
+ };
+
touch_reset_default: touch-reset-default-state {
pins = "gpio38";
function = "gpio";
--
2.39.5