Re: [PATCH RFC 6/6] ARM: add the SiRF AT550 platform and YPL514si board

From: Arnd Bergmann

Date: Tue Nov 17 2026 - 08:18:48 EST


On Tue, Nov 17, 2026, at 14:06, yy-Local-LLM via B4 Relay wrote:
> From: yy-Local-LLM <yogo.0917.sabu@xxxxxxxxx>
>
> Add a minimal DT machine using standard IRQ, timer and simplefb paths.
> Describe the SoC and the firmware-configured YPL514si display. Leave
> usable memory and the divided counter rate for the bootloader to
> populate. Keep optional peripheral nodes disabled until firmware hands
> them over. Disable unvalidated board suspend; limit this board to SD PIO
> at 25 MHz. Document the RAM-boot contract and the missing
> cold-boot/clock-tree support.
>
> Signed-off-by: yy-Local-LLM <yogo.0917.sabu@xxxxxxxxx>

Please use a real name for signoff and make sure you understand
the legal meaning of this.

> +config ARCH_AT550
> + bool "SiRF AT550 platforms"
> + depends on ARCH_MULTI_V6
> + select ARM_ERRATA_411920
> + select AT550_IRQ
> + select CLKSRC_AT550
> + select CPU_V6

Which CPU is this specifically? You need to select CPU_ARM1136R0,
CPU_ARM1136R1 or CPU_ARM1176 instead CPU_V6 since b5fdfa208175
("ARM: deprecate support for ARM1136r0").

Arnd