Re: [PATCH net-next 0/4] net: lan969x: skew the core clock by 200 ppm

From: patchwork-bot+netdevbpf

Date: Tue Nov 17 2026 - 09:00:15 EST


Hello:

This series was applied to netdev/net-next.git (main)
by Paolo Abeni <pabeni@xxxxxxxxxx>:

On Fri, 13 Nov 2026 11:19:39 +0100 you wrote:
> At its 328.125 MHz default, the lan969x core clock is too close to the
> line clock frequencies for the high accuracy phase detectors to work as
> intended, which degrades PTP accuracy. The core clock should therefore
> be skewed about 200 ppm up. The PTP time of day (TOD) increment is
> already set up for the skewed rate, but the driver leaves the core PLL
> at its default, so the TOD and the clock that drives the scheduler run
> 200 ppm apart.
>
> [...]

Here is the summary with links:
- [net-next,1/4] net: lan969x: add the core PLL registers
https://git.kernel.org/netdev/net-next/c/5f8d69a43e72
- [net-next,2/4] net: sparx5/lan969x: enable the switch core after clock setup
https://git.kernel.org/netdev/net-next/c/ae590854818f
- [net-next,3/4] net: lan969x: configure the core PLL
https://git.kernel.org/netdev/net-next/c/39d5dff49d71
- [net-next,4/4] net: sparx5/lan969x: scale the nominal TOD increment in adjfine
https://git.kernel.org/netdev/net-next/c/7e8651f87504

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html