Re: [PATCH] platform/x86: samsung-galaxybook: Re-enable ACPI features on resume
From: Spandan Barve
Date: Tue Nov 17 2026 - 10:37:47 EST
Hi Jamil,
Same problem here on another model: Galaxy Book5 Pro 940XHA (SAM0430,
Core Ultra 7 258V, BIOS P07VAJ.330.250516.01), on Arch's linux-zen
7.3.4. I applied your patch to the 7.3.4 driver source (it applies with
offsets), built it out-of-tree and loaded it in place of the stock
module. Hibernation goes to a swap file via systemctl hibernate.
With the stock module, after one hibernate/restore cycle:
$ cat /sys/class/power_supply/BAT1/charge_control_end_threshold
cat: /sys/class/power_supply/BAT1/charge_control_end_threshold: No such device or address
$ wc -c < /sys/class/power_supply/BAT1/uevent
0
$ cat /sys/class/firmware-attributes/samsung-galaxybook/attributes/power_on_lid_open/current_value
cat: [...]/power_on_lid_open/current_value: No such device or address
and right after "PM: hibernation: hibernation exit" the log has 50 of
acpi SAM0430:00: failed to execute CSFI; device responded with failure code 0xff
power_supply BAT1: driver failed to report `charge_control_end_threshold' property: -6
They keep coming for as long as something reads the battery: an earlier
boot on 7.2.15 logged 5443 of them.
With the patch, over two hibernate/restore cycles and one s2idle cycle,
charge_control_end_threshold still reads 80, BAT1/uevent is complete,
power_on_lid_open and usb_charging read back, and there are no CSFI
errors or other new messages after resume. platform_profile works with
and without the patch, as you noted.
Tested-by: Spandan Barve <spandan567@xxxxxxxxx>