[PATCH 2/2] arm64: dts: ti: k3-am69-aquila: Add ath12k calibration variant

From: Vitor Soares

Date: Tue Nov 17 2026 - 12:42:29 EST


From: Vitor Soares <vitor.soares@xxxxxxxxxxx>

The Aquila AM69 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The
module reports the same PCI and QMI IDs as other WCN7850 designs,
and its board data also comes in variants for different regulatory
domains (US/EU/JP, UK/CA low and high). The IDs alone therefore
cannot identify the right board data.

Describe the Wi-Fi device behind the PCIE3 root port and set
qcom,calibration-variant to the US/EU/JP board data.

Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
index b6854acee8fe..62904e9bcc71 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
@@ -1393,6 +1393,21 @@ &pcie3_rc {
reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_HIGH>;
ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>;
status = "okay";
+
+ pci@0,0 {
+ device_type = "pci";
+ compatible = "pciclass,0604";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ qcom,calibration-variant = "Silex_SX-PCEBE_US_EU_JP";
+ };
+ };
};

&serdes0 {
--
2.53.0