[RFC PATCH v6 0/2] ALSA: usb-audio: working hardware volume for XiiSound headsets (040b:0897)
From: Pavel Artemev
Date: Tue Nov 17 2026 - 13:08:01 EST
During a two-week campaign to make a Temple (XiiSound/Weltrend
040b:0897) wireless dongle audible I captured the complete control
traffic of the device on both Linux (usbmon) and the vendor's own
Windows 10 stack (USBPcap). This cover letter summarizes what the
wire says about this chipset, because it differs from the device model
encoded in the recently merged workaround, commit ba9bccdf711a
("ALSA: usb-audio: Skip broken playback feature unit on XiiSound
chips"), which is queued for 7.5.
To be clear up front: that commit fixes the user-visible bug (the
dongle coming up silent or one-eared), nothing here is a regression
report against it, and this RFC is not asking for its immediate
removal. It proposes the alternative I ended up running locally -
keep the playback feature unit exposed and make its hardware volume
work - and offers the captures as evidence, both for this design
discussion and for whoever debugs these devices next.
What the wire shows
===================
1. The playback feature unit is a working hardware volume. Per-
channel SET_CUR writes apply deterministically and independently
(a fast pair CN1<-50 + CN2<-100 applies exactly; a lone channel
write does not disturb its sibling), the master gates both ears
symmetrically, and intermediate values are audible and graded.
The vendor's Windows driver drives this exact unit on every slider
and hardware-button step, mapped linearly from its slider percent
(10% -> raw 9, 50% -> raw 49), and every intermediate value is
audible there too.
2. The "any volume below the maximum mutes one or both channels"
behaviour that motivated the skip is host-side, in three stacked
layers:
- the unit advertises a bogus 0.00..0.39 dB range, under which
every user-space volume at or below 0 dB - the whole normal
PipeWire range, 100% included - resolves to the raw minimum,
which does silence the channel;
- the stereo control's GET_CUR returns a constant value, so the
sticky-GET sanity check classifies it broken and the probe
writes the minimum to both channels at every mixer build;
- user space applies one logical volume change as fragmented
writes (one per channel, the first carrying the stale sibling
value), and the device silently drops control writes in the
first seconds after enumeration (measured: the window closes
6.5-9 s after enumeration, with a ragged tail), so a stale
channel can survive until some later write happens to refresh
it. The per-ear asymmetry users report is exactly this stale
state, not a channel-mapping property: under wire-verified
canonical writes the attenuation is symmetric (12/12 steps).
3. The Windows driver never reads back (GET_CUR is broken, so it
cannot), and does not need to: it keeps the whole channel picture
at a single source of truth, writes every channel of a control in
one short burst - master first - and re-pushes the complete state
at every device open. That every-open re-push is what repairs
whatever the enumeration window swallowed.
One consequence worth recording: the create-time pin writes of the
merged quirk sit inside the loss window and are dropped along with
every other early write. The dongle still comes up audible because
it powers up with every volume channel at the maximum - which is what
the pin intended to enforce anyway - and the resume re-pin added in
its v3 is the part that does real work. So the merged fix is sound
in effect; only its description of the hardware is not.
The RFC
=======
Patch 1 replaces the skip-and-pin with three quirk flags for
040b:0897: the new QUIRK_FLAG_MIXER_INIT_VOLUME_MAX (initialize the
channels of volume controls to the maximum instead of the minimum,
exactly where the broken-GET minimum writes happen) plus the existing
PLAYBACK/CAPTURE LINEAR_VOL flags (linear scale instead of the bogus
dB range). Hardware volume then behaves like on Windows.
Patch 2 adds QUIRK_FLAG_MIXER_STATE_REPUSH, which replicates the
vendor's write discipline for write-lossy devices: volume and mute
puts only record values, one deferred flush writes each touched
feature unit in a single canonical burst (master first, derived from
the loudest channel), and every PCM stream open and resume re-push
the full cached state - the every-open repair the Windows stack
relies on. This is new mechanism territory (I found no prior
proposal for write batching or re-push in the archives), hence RFC.
Both ran as locally built DKMS modules - first against a 7.2 tree over
the wire-verified campaign, then successive revisions against 7.3.4 -
and in daily use; details in the commit messages.
Known limitations, stated for the record:
- Through the linear scale PipeWire applies its cubic, so the
mid-slider feel is quieter than on Windows (50% -> raw ~12).
Users who want the vendor loudness feel can set
api.alsa.soft-mixer = true - which is effectively what the merged
skip approach gives everyone. The value of this RFC is that the
choice stays with the user and the hardware volume keeps working
for stacks that do drive it.
- After a replug the device sits at its power-up state (maximum)
until the first write lands past the loss window; with patch 2 a
stream open re-pushes and heals, provided streams actually open
and close (a wedged PipeWire session that holds the device open
indefinitely defers the heal to the first user volume gesture).
- Hardware buttons keep stepping an internal device state that the
host cannot observe (no readback); neither approach - skip or
drive - syncs with the buttons.
I am happy to rework or drop either patch; the capture evidence is
offered independently of the design preference.
Changes in v6
=============
Thanks to the sashiko AI review for the v5 pass; both findings are
addressed:
- Master ownership now transfers on any volume-channel write
request, unchanged values included. v5 only re-claimed
derivation when a channel value actually changed, so a master
restored by alsactl - which restores channels before the master,
leaving the master put as the last write - stayed the owner
through the audio server's subsequent no-op channel writes, and
the re-pushes kept asserting the alsactl master instead of the
derived one until the first changed gesture.
- A channel put superseding an unflushed explicit master put now
drops the master's cache entry along with its pending bit. v5
kept the never-written value cached: when it equaled the control's
raw maximum, the limit-aware re-assert skip mistook it for device
state and swallowed every later derive - the hardware master
stayed stuck below its channels with no healer.
- A local pre-send review run of the same public prompts also
flagged smaller items, addressed here: patch 1's init-max quirk
now excludes mixer unit controls (their control selector field
stores a 1-based input pin number, which aliases UAC_FU_VOLUME -
a broken-GET mixer unit input would have been initialized to the
maximum instead of the minimum; latent, this device has no mixer
units); processing-unit selectors sharing the 0x02 value are
disclosed in the commit message as not excluded (none exist on
this device); the quirk flag documentation no longer describes
the stream-open re-push as a full-state re-push (it re-sends
cached volumes; only a resume additionally re-asserts cached
mutes) - in both the header comment and the docs; and a master
put arriving right after an ownership transfer dropped its cache
entry is now recorded unconditionally instead of read back (on
broken-GET master controls that read would fail until the next
derive re-caches). The same review confirmed the two v5
findings as fixed in code and probed the ownership-transfer
machinery for residue; the one accepted residual is that an
ownership transfer empties the master cache, so the next re-push
re-derives the master even at the raw maximum - never a lone
write, it shares the burst with the channel re-pushes.
Wire-verified on the device against 7.3.4: the v5 verification set
still holds (superseded explicit value never reaching the wire,
stream-open re-push re-asserting the master below the raw maximum,
raw-max skip, runtime-PM paths); the v6 ownership changes likewise:
a no-op volume-channel write following an explicit master put
re-claims derivation, so the stream-open re-push derives the master
instead of re-asserting the explicit value, and an explicit master
put to the raw maximum superseded by a channel put in the same flush
window produces the full derived burst including the master.
--
2.56.1