Re: [PATCH v2 15/17] riscv: dts: spacemit: k3-pico-itx: enable the DisplayPort output
From: Guodong Xu
Date: Tue Nov 17 2026 - 15:51:53 EST
Hi Icenowy,
On Thu, 03 Sep 2026 20:09:42 +0800, Icenowy Zheng wrote:
> The connector available on the Pico-ITX mainboard isn't a DisplayPort
> port -- it's a USB Type-C port instead.
Right, it is a Type-C receptacle, and the commit message should say
so.
> I think you need to model the Type-C port and alt functions of it.
I am not sure that can be done on this board. The redriver/mux in
front of the receptacle and the PD controller that steers it both
sit on the EC's own I2C bus, and their interrupt goes to the EC too.
The SoC has no bus to either chip; all it gets from that side is the
DP1 HPD line.
So a usb-c-connector node would have nothing to link to here.
Guodong