Re: [PATCH v7 1/6] dt-bindings: pinctrl: add the NXP LX2160A RCW pad mux
From: Vladimir Oltean
Date: Tue Nov 17 2026 - 16:07:36 EST
On Tue, Nov 17, 2026 at 03:53:11PM +0100, Vincent Jardin via B4 Relay wrote:
> From: Vincent Jardin <vjardin@xxxxxxx>
>
> The LX2160A muxes its IIC, XSPI, SDHC, UART, IRQ, EVT, EC and USB pads
> from fields of the RCW: read-only in RCWSR12..14 and RCWSR27 of DCFG,
> changed at runtime through the override registers of its DCSR view.
>
> Describe the pad mux as a child of DCFG at its RCWSR12 to RCWSR14 and
> RCWSR27 windows: the override registers are at the same offsets of the
> DCSR view of the parent. One group per RCW field, one function per
> encoding.
>
> Each function lists the groups that take it, so a pair the driver
> would refuse, such as can on iic1, is refused by the schema.
>
> Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
> Signed-off-by: Vincent Jardin <vjardin@xxxxxxx>
> ---
It's a bit difficult to manually follow all the constraints, which are
listed in the opposite way as the RM would have them (function -> valid pads
rather than pad -> valid functions), but AI says it's OK and I'm not
spotting any obvious problems either.
Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>