[PATCH 0/3] ACPI: RISC-V: Add support for the RQSC table
From: Drew Fustini (Tenstorrent)
Date: Tue Nov 17 2026 - 17:11:51 EST
Add support for the ACPI RISC-V Quality of Service Controllers (RQSC)
table [1] that describes the CBQRI controllers [2] present in a system.
Create a platform device for each controller so that the same CBQRI
driver can bind on device tree and ACPI systems.
Patch 1 adds the table definitions. They stay in drivers/acpi/riscv
until ACPICA carries them [3]. Patch 2 parses the table and creates
the platform devices. It is derived from the large RFC series that
implemented all of CBQRI [4]. Patch 3 makes the CBQRI capacity driver
bind to the capacity controller devices. I plan to add support for
bandwidth controller devices once the resctrl generic schema lands.
This series depends on:
- "riscv: Add initial CBQRI resctrl support" v12 [5]
Tested on QEMU virt with the RQSC table support [6], two L2 capacity
controllers, one L3 capacity controller and one bandwidth controller:
ACPI: RQSC 0x00000000BDD5B000 0000E0 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: RQSC: 4 CBQRI controllers
# ls /sys/bus/platform/devices | grep cbqri
cbqri-bandwidth.2
cbqri-capacity.0
cbqri-capacity.1
cbqri-capacity.3
# grep cbqri /proc/iomem
04820000-04820fff : cbqri-capacity.0
04820000-04820fff : cbqri-capacity.0 cbqri-capacity.0
04821000-04821fff : cbqri-capacity.1
04821000-04821fff : cbqri-capacity.1 cbqri-capacity.1
04828000-04828fff : cbqri-bandwidth.2
0482b000-0482bfff : cbqri-capacity.3
0482b000-0482bfff : cbqri-capacity.3 cbqri-capacity.3
The capacity driver binds and resctrl shows the L2 and L3 domains:
cbqri-capacity cbqri-capacity.0: registered L2 capacity controller at 0x0000000004820000 (cache_id=33685504, rcid=64)
cbqri-capacity cbqri-capacity.1: registered L2 capacity controller at 0x0000000004821000 (cache_id=33685508, rcid=64)
cbqri-capacity cbqri-capacity.3: registered L3 capacity controller at 0x000000000482b000 (cache_id=33751040, rcid=64)
# mount -t resctrl resctrl /sys/fs/resctrl
# cat /sys/fs/resctrl/schemata
L2:33685504=fff;33685508=fff
L3:33751040=ffff
[1] https://github.com/riscv-non-isa/riscv-rqsc/releases/tag/v1.0.0
[2] https://github.com/riscv-non-isa/riscv-cbqri/releases/tag/v1.0
[3] https://github.com/open-acpica/acpica/pull/1262
[4] https://lore.kernel.org/all/20260601-ssqosid-cbqri-rqsc-v7-0-v6-0-baf00f50028a@xxxxxxxxxx/
[5] https://lore.kernel.org/all/20261114-dfustini-atl-sc-cbqri-dt-v12-0-6ef1f627072d@xxxxxxxxxx/
[6] https://lore.kernel.org/qemu-devel/20261113-riscv-rqsc-v2-0-34d47fa4141e@xxxxxxxxxx/
Signed-off-by: Drew Fustini (Tenstorrent) <fustini@xxxxxxxxxx>
---
Drew Fustini (Tenstorrent) (3):
ACPI: RISC-V: Add RQSC table definitions
ACPI: RISC-V: Enumerate CBQRI controllers from the RQSC table
riscv_cbqri: Bind to RQSC platform devices
drivers/acpi/riscv/Kconfig | 3 +
drivers/acpi/riscv/Makefile | 1 +
drivers/acpi/riscv/init.c | 2 +
drivers/acpi/riscv/init.h | 1 +
drivers/acpi/riscv/rqsc.c | 210 +++++++++++++++++++++++++++++++++++++++
drivers/acpi/riscv/rqsc.h | 67 +++++++++++++
drivers/resctrl/Kconfig | 11 +-
drivers/resctrl/cbqri_capacity.c | 111 +++++++++++++++------
8 files changed, 371 insertions(+), 35 deletions(-)
---
base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
change-id: 20261108-acpi-rqsc-6df871ab608a
prerequisite-change-id: 20260610-dfustini-atl-sc-cbqri-dt-410c8e2711dd:v12
prerequisite-patch-id: 492fe81aa4f3c885ac5bb48252def2fdc5527275
prerequisite-patch-id: b4f0bd4bf660c92dbf4ca0c7d871c1550b66df0d
prerequisite-patch-id: a2e36f0788f8e11c708d162dce653351dd99c4f0
prerequisite-patch-id: d1d359c5cf89b2b5018d64ca8f320892f6dbcca2
prerequisite-patch-id: 5b7fea6f1ad8f2137ffe45681d56b83e17f7cb2a
Best regards,
--
Drew Fustini (Tenstorrent) <fustini@xxxxxxxxxx>