Re: [PATCH 4/6] arm64: dts: allwinner: a100: Add A133 speed grade efuse cells
From: Alexander Sverdlin
Date: Tue Nov 17 2026 - 17:39:27 EST
Hi Rajan!
On Wed, 2026-11-04 at 22:40 -0600, Rajan Yadav via B4 Relay wrote:
> From: Rajan Yadav <rajanyadav0307@xxxxxxxxx>
>
> The A133 speed grade selection also needs the chip marking ID (SID
> offset 0x00), the word at 0x20, whose low 12 bits the vendor BSP calls
> PCPU, and the word at 0x28 with the bin extension bit. Add nvmem cells
> for them at the offsets the BSP uses. The H616 reads the same kind of
> marking ID at offset 0x00 as its speed grade.
>
> The cells are used by the A133 OPP table added later in this series;
> the A100 OPP table keeps using only the existing 0x1c cell.
>
> Claude Code (Anthropic) drafted this change and its message from the
> vendor BSP device tree; I reviewed it and checked it with dtbs_check.
>
> Signed-off-by: Rajan Yadav <rajanyadav0307@xxxxxxxxx>
Reviewed-by: Alexander Sverdlin <alex@xxxxxxxxxxxx>
Tested-by: Alexander Sverdlin <alex@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>