[PATCH net-next v3 0/4] net: mdio: Clause 45 support for mdio-bcm-unimac
From: Florian Fainelli
Date: Tue Nov 17 2026 - 18:32:29 EST
This patch series adds support for Clause 45 MDIO operations within the
mdio-bcm-unimac driver. The series breaks things up in this way:
- make the C45 bus scan done by the MDIO core carry on when nothing
answers at an address, as the C22 scan already does
- scope the existing defines to make it clear what is C22 vs. C45
specific
- rework the polling completion loop to be a tighter loop
- add support for clause 45 operations
Changes in v3:
- patch 1: collect Reviewed-by tag from Nicolai Buchwitz, no code changes
- patches 2 and 3: no changes
- patch 4:
- after the ADDR cycle, make sure the controller is idle before starting
the READ/WRITE cycle, since a wait_func() such as bcmgenet_mii_wait()
returns 0 even when it timed out with START_BUSY still set
- take bus->mdio_lock in unimac_mdio_resume() around
unimac_mdio_clk_set(), such that its read-modify-write of MDIO_CFG
cannot race with the C22/C45 clause switch done by the accessors
Changes in v2:
- add patch 1, since providing read_c45/write_c45 makes the MDIO core scan
for C45 PHYs on all addresses that are not masked. On a bus registered
without a device tree node (e.g.: GENET with ACPI) a read from an empty
address fails with -EIO, which get_phy_c45_ids() passed up instead of
mapping it to -ENODEV, and made the whole bus registration fail. Reported
by Nicolai Buchwitz.
- patches 2 and 3: collect Reviewed-by tags from Andrew Lunn and Nicolai
Buchwitz, no code changes
- patch 4: no code changes
Florian Fainelli (4):
net: phy: Map C45 probe read errors to -ENODEV during bus scan
net: mdio: mdio-bcm-unimac: Define MDIO_OP_SHIFT
net: mdio: mdio-bcm-unimac: Poll for completion at 1us granularity
net: mdio: mdio-bcm-unimac: Add Clause 45 support
drivers/net/mdio/mdio-bcm-unimac.c | 150 ++++++++++++++++++++++++++---
drivers/net/phy/phy_device.c | 24 ++++-
2 files changed, 153 insertions(+), 21 deletions(-)
--
2.34.1