[PATCH] drm/mediatek: dsi: Don't let a signal cut the IRQ wait short

From: Zi-Hao Huang via B4 Relay

Date: Tue Nov 17 2026 - 20:25:35 EST


From: Zi-Hao Huang <zi-hao.huang@xxxxxxxxxxxx>

mtk_dsi_wait_for_irq_done() waits for the DSI IRQ with
wait_event_interruptible_timeout(). If it returns early, for example
with -ERESTARTSYS when a signal is pending, both callers still treat the
command as done, because they only handle a return value of 0 as a
failure.

On an MT8196 board this led to a hard lockup during shutdown. The wait
returned before the IRQ arrived, the panel disable sequence went on and
restarted video mode, and the late CMD_DONE interrupt was then handled
by mtk_dsi_irq(). The handler writes RACK and loops until DSI_BUSY
clears, but DSI_BUSY stays set while video mode is running, so the CPU
never leaves the handler until the watchdog fires. Forcing the wait to
return early reproduces the lockup every time, and it no longer
happens once the wait cannot return early.

The wait is made from the driver's own context to synchronise with the
hardware, not on behalf of a userspace request, and it is bounded by its
timeout. Use wait_event_timeout() so that it only ends on the IRQ or the
timeout.

wake_up_interruptible() cannot wake a task in uninterruptible sleep, so
switch mtk_dsi_irq() to wake_up(). Without it every wait would last
until its timeout.

Fixes: dd5080a54df8 ("drm/mediatek: add dsi interrupt control")
Signed-off-by: Zi-Hao Huang <zi-hao.huang@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index f82506e10fd5..1315dd31a834 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -627,9 +627,8 @@ static s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
unsigned long jiffies = msecs_to_jiffies(timeout);
struct drm_device *drm = dsi->bridge.dev;

- ret = wait_event_interruptible_timeout(dsi->irq_wait_queue,
- dsi->irq_data & irq_flag,
- jiffies);
+ ret = wait_event_timeout(dsi->irq_wait_queue,
+ dsi->irq_data & irq_flag, jiffies);
if (ret == 0) {
drm_warn(drm, "Wait DSI IRQ(0x%08x) Timeout\n", irq_flag);

@@ -656,7 +655,7 @@ static irqreturn_t mtk_dsi_irq(int irq, void *dev_id)

mtk_dsi_mask(dsi, DSI_INTSTA, status, 0);
mtk_dsi_irq_data_set(dsi, status);
- wake_up_interruptible(&dsi->irq_wait_queue);
+ wake_up(&dsi->irq_wait_queue);
}

return IRQ_HANDLED;

---
base-commit: 067c5c24cef23d913b67eaaf71ae67e7169a6620
change-id: 20261118-mtk-dsi-irq-wait-a24712ada627

Best regards,
--
Zi-Hao Huang <zi-hao.huang@xxxxxxxxxxxx>