RE: [PATCH v7 net-next 0/9] net: dsa: netc: add PTP support for NETC switch
From: Wei Fang
Date: Tue Nov 17 2026 - 23:24:19 EST
> This patch set adds PTP timestamping support to the NETC switch, so that
> the switch ports can be used for IEEE 1588 PTP synchronization.
>
> The NETC switch has no time registers of its own and instead shares the
> PTP time of the NETC Timer, which is a separate PCIe function driven by
> its own driver. The first 3 patches prepare the Timer driver for this
> role: tidy up its 64-bit register access, drop an ineffective reset, and
> export netc_timer_get_current_time() so the switch driver can read the
> current PTP time across the driver boundary in a race-free way.
>
> The switch redirects PTP frames to the CPU through the ingress port
> filter table (IPFT). A few patches harden and simplify the existing IPFT
> and host flood handling first, then enable the ingress port filtering
> lookup by default so PTP filter rules take effect without extra software
> tracking.
>
> On top of that groundwork, the switch driver gains RX timestamping and
> both flavours of TX timestamping. Timestamps are carried between the
> hardware and the driver through dedicated switch tags: the ingress and
> transmit timestamps ride in To_Host tags, and per-frame requests ride in
> To_Port tags. Two-step TX matches a queued skb clone against the
> timestamp response echoed back by the hardware. One-step TX defers the
> Sync frame to a per-port work, where the driver reads a fresh PTP time
> and writes it into the Sync frame's timestamp field, then programs the
> single-step register and transmits the frame so the hardware can add the
> residence time to the correction field on the wire.
>
> Together these changes let standard user-space PTP stacks drive hardware
> timestamping on the NETC switch ports.
>
> ---
> v7 changes:
> 1. Rename in_probe to configured in struct netc_switch
> 2. ptp_ipft_eid[] is initialized for every port, next to ipft_hf_eid
> 3. Return -EOPNOTSUPP when netc_get_phc_index() is negative in
> netc_port_hwtstamp_get()
> 4. Initialize onestep_state to NETC_ONESTEP_PORT_INACTIVE in
> netc_port_ptp_init()
> 5. Drop the netc_port_enable_onestep() call from netc_port_enable()
> 6. When the frame is not known to be a one-step Sync, set *twostep to
> true instead of dropping it
> v6 link: https://lore.kernel.org/imx/20261103021024.3121936-1-
> wei.fang@xxxxxxxxxxx/
> v5 link: https://lore.kernel.org/imx/20261012095924.1129312-1-
> wei.fang@xxxxxxxxxxx/
> v4 link: https://lore.kernel.org/imx/20260918072852.501420-1-
> wei.fang@xxxxxxxxxxx/
> v3 link: https://lore.kernel.org/imx/20260831082335.1184605-1-
> wei.fang@xxxxxxxxxxx/
> v2 link: https://lore.kernel.org/imx/20260808032146.2335723-1-
> wei.fang@xxxxxxxxxxx/
> v1 link: https://lore.kernel.org/imx/20260728104548.3301214-1-
> wei.fang@xxxxxxxxxxx/
> ---
>
> Wei Fang (9):
> ptp: netc: use ioread64_lo_hi/iowrite64_lo_hi for 64-bit register
> access
> ptp: netc: remove unnecessary pcie_flr() call in probe
> ptp: netc: export netc_timer_get_current_time() for cross-driver use
> net: dsa: netc: tie setup resources and reset to DSA setup/teardown
> net: dsa: netc: use entry ID instead of pointer to track host flood
> rule
> net: dsa: netc: check return value of ntmp_ipft_delete_entry()
> net: dsa: netc: enable ingress port filtering lookup by default
> net: dsa: netc: add PTP two-step timestamping support
> net: dsa: netc: add PTP one-step timestamping support
>
> drivers/net/dsa/netc/Kconfig | 2 +
> drivers/net/dsa/netc/Makefile | 3 +-
> drivers/net/dsa/netc/netc_main.c | 404 +++++++++---
> drivers/net/dsa/netc/netc_platform.c | 1 +
> drivers/net/dsa/netc/netc_ptp.c | 895 ++++++++++++++++++++++++++
> drivers/net/dsa/netc/netc_switch.h | 67 +-
> drivers/net/dsa/netc/netc_switch_hw.h | 5 +
> drivers/ptp/ptp_netc.c | 136 ++--
> include/linux/dsa/tag_netc.h | 38 ++
> include/linux/fsl/netc_global.h | 10 +
> net/dsa/tag_netc.c | 228 ++++++-
> 11 files changed, 1619 insertions(+), 170 deletions(-)
> create mode 100644 drivers/net/dsa/netc/netc_ptp.c
>
> --
> 2.34.1
The code base of the switch driver has been updated, so this series
needs to be rebased as well.
--
pw-bot: cr