[PATCH 7/9] riscv: dts: spacemit: Describe the K3 eSPI controller

From: Wang Yang

Date: Wed Nov 18 2026 - 03:58:45 EST


Add the disabled eSPI controller with its memory window, clock and reset
connections. Keep the board-specific EC child out of the common SoC
description. Other K3 boards remain disabled by default.

Prepared with Codex assistance from the existing DC-linux EC support.

Signed-off-by: Wang Yang <yang.wang@xxxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/spacemit/k3.dtsi | 31 ++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
index e89d2cc5c..d859c84bb 100644
--- a/arch/riscv/boot/dts/spacemit/k3.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
@@ -648,6 +648,37 @@ gmac1_axi_setup: stmmac-axi-config {
};
};

+ espi0: espi@cac8c000 {
+ compatible = "spacemit,k3-espi";
+ reg = <0x0 0xcac8c000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x84000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pr-mem-base0 = <0x84000000>;
+ pr-mem-base1 = <0xcac8c000>;
+ clocks = <&syscon_apmu CLK_APMU_ESPI_SCLK_SRC>,
+ <&syscon_apmu CLK_APMU_ESPI_SCLK>,
+ <&syscon_apmu CLK_APMU_ESPI_MCLK>;
+ clock-names = "sclk_src", "sclk", "mclk";
+ resets = <&syscon_apmu RESET_APMU_ESPI_MCLK>,
+ <&syscon_apmu RESET_APMU_ESPI_SCLK>;
+ assigned-clocks = <&syscon_apmu CLK_APMU_ESPI_SCLK>;
+ assigned-clock-parents = <&syscon_apmu CLK_APMU_ESPI_SCLK_SRC>;
+ operating-frequency = <20>;
+ io-mode = "single";
+ alert-mode = "io1";
+ alert-type = "open-drain";
+ watchdog-timeout = <0xffff>;
+ crc-enable;
+ auto-gating-enable;
+ peripheral-channel-enable;
+ vwire-channel-enable;
+ oob-channel-enable;
+ flash-channel-enable;
+
+ status = "disabled";
+ };
+
eth2: ethernet@cac8e000 {
compatible = "spacemit,k3-dwmac", "snps,dwmac-5.40a";
reg = <0x0 0xcac8e000 0x0 0x2000>;
--
2.43.0