[PATCH net-next 0/4] net: enetc: Add i.MX952 support
From: Frieder Schrempf
Date: Wed Nov 18 2026 - 05:39:02 EST
This adds support for the NETC Ethernet controller on the i.MX952 SoC.
i.MX952 has two ENETC instances (IP revision 4.6), each on its own
PCIe bus. ENETC0 shares bus 0 with the NETC timer and the central EMDIO,
ENETC1 sits alone on bus 1. The NETC system clock runs at 133 MHz,
compared to 333 MHz on i.MX95.
The patches are ported from NXP's lf-6.18.y vendor kernel. The device
tree changes for imx952.dtsi and the i.MX952 EVK will be sent separately
to the i.MX tree.
Tested on the i.MX952 EVK with ENETC0 (RGMII): the link works,
hardware timestamping is available and the PHC runs at the correct
rate. ENETC1 is untested as it needs an add-on board.
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Clark Wang (2):
net: enetc: netc_blk_ctrl: add i.MX952 support
ptp: netc: use 133 MHz system clock on i.MX952
Frieder Schrempf (1):
dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
Wei Fang (1):
net: enetc: add i.MX952 ENETC support
.../devicetree/bindings/net/nxp,netc-blk-ctrl.yaml | 1 +
drivers/net/ethernet/freescale/enetc/enetc.c | 23 +++++++
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 1 +
drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 +
.../net/ethernet/freescale/enetc/netc_blk_ctrl.c | 73 ++++++++++++++++++++++
drivers/ptp/ptp_netc.c | 7 ++-
6 files changed, 106 insertions(+), 1 deletion(-)
---
base-commit: d6816d9a93b66a12bf01e10037e377f3333ad6cc
change-id: 20261118-imx952-enetc-bd2bc331e1b5
Best regards,
--
Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>