RE: [PATCH net-next 0/4] net: enetc: Add i.MX952 support
From: Clark Wang
Date: Wed Nov 18 2026 - 05:44:05 EST
> Subject: [PATCH net-next 0/4] net: enetc: Add i.MX952 support
>
> This adds support for the NETC Ethernet controller on the i.MX952 SoC.
>
> i.MX952 has two ENETC instances (IP revision 4.6), each on its own PCIe bus.
> ENETC0 shares bus 0 with the NETC timer and the central EMDIO,
> ENETC1 sits alone on bus 1. The NETC system clock runs at 133 MHz, compared to
> 333 MHz on i.MX95.
>
> The patches are ported from NXP's lf-6.18.y vendor kernel. The device tree
> changes for imx952.dtsi and the i.MX952 EVK will be sent separately to the i.MX
> tree.
>
> Tested on the i.MX952 EVK with ENETC0 (RGMII): the link works, hardware
> timestamping is available and the PHC runs at the correct rate. ENETC1 is
> untested as it needs an add-on board.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> ---
> Clark Wang (2):
> net: enetc: netc_blk_ctrl: add i.MX952 support
> ptp: netc: use 133 MHz system clock on i.MX952
>
> Frieder Schrempf (1):
> dt-bindings: net: nxp,netc-blk-ctrl: add i.MX952 compatible
>
> Wei Fang (1):
> net: enetc: add i.MX952 ENETC support
>
> .../devicetree/bindings/net/nxp,netc-blk-ctrl.yaml | 1 +
> drivers/net/ethernet/freescale/enetc/enetc.c | 23 +++++++
> .../net/ethernet/freescale/enetc/enetc_ethtool.c | 1 +
> drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 +
> .../net/ethernet/freescale/enetc/netc_blk_ctrl.c | 73
> ++++++++++++++++++++++
> drivers/ptp/ptp_netc.c | 7 ++-
> 6 files changed, 106 insertions(+), 1 deletion(-)
> ---
> base-commit: d6816d9a93b66a12bf01e10037e377f3333ad6cc
> change-id: 20261118-imx952-enetc-bd2bc331e1b5
>
> Best regards,
> --
> Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Hi Frieder,
I have sent the V1 patchset for imx952, will sent V2 this week.
https://lore.kernel.org/all/20261104092217.1730351-1-xiaoning.wang@xxxxxxxxxxx/
Thanks!
Best Regards,
Clark Wang