Re: [PATCH net-next 0/4] net: enetc: add i.MX952 NETC v4.6 support
From: Frieder Schrempf
Date: Wed Nov 18 2026 - 05:53:12 EST
On 04.11.26 10:22, xiaoning.wang@xxxxxxxxxxx wrote:
> From: Clark Wang <xiaoning.wang@xxxxxxx>
>
> This series adds Ethernet support for the NXP i.MX952, whose NETC is
> revision 4.6. Its NETC integration differs from i.MX95 and i.MX94 in
> the following ways:
> - there are two standalone ENETCs and no switch: ENETC 0 on PCIe bus 0
> (RMII/RGMII) and ENETC 1 on PCIe bus 1 (RMII/RGMII/SGMII), plus a
> single IEEE 1588 timer;
> - the NETC system clock is 133 MHz instead of 333 MHz;
> - the reset value of the ENETC 0 Tx byte credit registers is too small
> for jumbo frames.
>
> The DTS patch set will be sent separately after this series is applied.
Tested-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>