Re: [PATCH v8 6/6] arm64: dts: lx2160a: note that i2c6 and i2c7 share their pad mux

From: Vladimir Oltean

Date: Wed Nov 18 2026 - 07:13:36 EST


On Wed, Nov 18, 2026 at 12:00:20PM +0100, Vincent Jardin via B4 Relay wrote:
> From: Vincent Jardin <vjardin@xxxxxxx>
>
> IIC7 and IIC8, the i2c6 and i2c7 nodes, exist only on the SDHC2_DAT[7:4]
> pads, and one RCW field, SDHC2_DAT74_PMUX, muxes all four of them:
> - 0b010 gives both buses
> - 0b001 gives GPIO2[18:15]
>
> Both nodes point at the same two pin states of that field. A board that
> enables one of the two buses gets a working bus recovery from them, so
> they stay in the SoC dtsi.
>
> A board that enables both cannot use them: the pinctrl core gives the
> field to the first controller and the second one fails to probe, and
> the bus recovery of one would switch the pads of the other one to GPIO
> too. Say so above each node.
>
> Suggested-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
> Link: https://lore.kernel.org/all/avzGrorxOg2GmYOl@xxxxxxxxxxxxxxxxxxxx/
> Signed-off-by: Vincent Jardin <vjardin@xxxxxxx>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>