Re: [PATCH v2] module: Add LZ4 module compression

From: Petr Pavlu

Date: Wed Nov 18 2026 - 08:19:54 EST


On 11/15/26 1:04 PM, Paul Menzel wrote:
> XZ modules are small but slow to decompress in the kernel. Therefore,
> support modules compressed in the LZ4 frame format (.ko.lz4), as written
> by lz4(1). Decode block by block into a scratch buffer and copy into the
> module pages. Linked blocks keep the last 64 KiB of output in front of
> the scratch buffer as the dictionary. Verify the header checksum, block
> checksums, content checksum and content size when the frame has them.
> Frames with a dictionary ID are rejected.
>
> modules_install uses `lz4 -12 -B4 -BD`: 64 KiB linked blocks are as
> small as 4 MiB blocks (i915.ko: 3587140 vs 3585364 bytes) and keep the
> scratch buffer at 128 KiB.
>
> Userspace needs kmod with LZ4 support for depmod and modprobe [1].
>
> On a Dell XPS 13 9310 with an Intel Core i7-1165G7 (Tiger Lake) and an
> NVMe SSD, decompressing and checking the signatures of the 237 modules
> loaded during boot takes 624 ms of CPU time with XZ (i915: 91 ms) and
> 131 ms with LZ4 (i915: 12 ms), measured by calling finit_module() again
> for each loaded module. The LZ4 modules take 20.3 MB instead of 11.0 MB.
> Both kernels are v7.4-rc1 with the same patches, including pending
> lib/xz decoder speed-ups. Ten alternating boots of each kernel:
>
> | ms (median) | XZ | LZ4 | change |
> +-------------------------------------------+------+------+--------+
> | early-i915 (modprobe i915 + dependencies) | 295 | 90 | -205 |
> | first i915 message | 738 | 547 | -192 |
> | GDM autologin | 973 | 876 | -96 |
> | GRUB start to autologin | 1292 | 1197 | -94 |
>
> QEMU 11.1.2 (KVM, AMD EPYC 7763, 8 vCPUs, module.sig_enforce=1, 10
> rounds), loading the same 237 modules in dependency order:
>
> | median | XZ | LZ4 | uncompressed |
> +--------------------------+---------+---------+--------------+
> | one at a time | 2082 ms | 1499 ms | 1461 ms |
> | 8 in parallel, like udev | 619 ms | 573 ms | 593 ms |
>
> Link: https://github.com/kmod-project/kmod/pull/505 [1]
> Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>

Which Linux distributions are interested in LZ4 compression for modules
and plan to use this feature?

> diff --git a/kernel/module/decompress.c b/kernel/module/decompress.c
> index cce098671be97..028b411015f21 100644
> --- a/kernel/module/decompress.c
> +++ b/kernel/module/decompress.c
> @@ -287,6 +287,249 @@ static ssize_t module_zstd_decompress(struct load_info *info,
> kvfree(wksp);
> return retval;
> }
> +#elif defined(CONFIG_MODULE_COMPRESS_LZ4)
> +#include <linux/bitfield.h>
> +#include <linux/lz4.h>
> +#include <linux/sizes.h>
> +#include <linux/unaligned.h>
> +#include <linux/xxhash.h>
> +#define MODULE_COMPRESSION lz4
> +#define MODULE_DECOMPRESS_FN module_lz4_decompress
> +
> +/*
> + * Decoder for the LZ4 frame format written by lz4(1), see
> + * https://github.com/lz4/lz4/blob/dev/doc/lz4_Frame_format.md
> + *
> + * Each block is decoded into a scratch buffer and copied into the module
> + * pages. A linked block may reference up to 64 KiB of the output before
> + * it, so that much output is kept in front of the scratch buffer.
> + */
> +#define LZ4F_MAGIC 0x184d2204
> +
> +/* Frame descriptor, FLG byte */
> +#define LZ4F_FLG_VERSION GENMASK(7, 6)
> +#define LZ4F_FLG_BLOCK_INDEP BIT(5)
> +#define LZ4F_FLG_BLOCK_CSUM BIT(4)
> +#define LZ4F_FLG_CONTENT_SIZE BIT(3)
> +#define LZ4F_FLG_CONTENT_CSUM BIT(2)
> +#define LZ4F_FLG_RESERVED BIT(1)
> +#define LZ4F_FLG_DICT_ID BIT(0)
> +
> +/* Frame descriptor, BD byte */
> +#define LZ4F_BD_BLOCK_MAXSIZE GENMASK(6, 4)
> +#define LZ4F_BD_RESERVED (BIT(7) | GENMASK(3, 0))
> +
> +/* Block size field: the top bit marks a block stored uncompressed */
> +#define LZ4F_BLOCK_UNCOMPRESSED BIT(31)
> +
> +#define LZ4F_WINDOW_SIZE SZ_64K
> +
> +/* Block maximum sizes for the BD byte's Block MaxSize values 4 to 7 */
> +static const u32 lz4f_block_max[] = { SZ_64K, SZ_256K, SZ_1M, SZ_4M };
> +
> +static int module_lz4_copy_out(struct load_info *info, const u8 *src,
> + size_t len, size_t *total)
> +{
> + while (len) {
> + size_t offset = *total % PAGE_SIZE;
> + size_t chunk = min_t(size_t, len, PAGE_SIZE - offset);
> + struct page *page;
> +
> + if (offset)
> + page = info->pages[info->used_pages - 1];
> + else
> + page = module_get_next_page(info);
> + if (IS_ERR(page))
> + return PTR_ERR(page);
> +
> + memcpy_to_page(page, offset, src, chunk);
> + src += chunk;
> + len -= chunk;
> + *total += chunk;
> + }
> +
> + return 0;
> +}
> +
> +static int module_lz4_verify_content(struct load_info *info, size_t total,
> + u32 expected)
> +{
> + void *data;
> + u32 csum;
> +
> + data = vmap(info->pages, info->used_pages, VM_MAP, PAGE_KERNEL_RO);
> + if (!data)
> + return -ENOMEM;
> + csum = xxh32(data, total, 0);
> + vunmap(data);
> +
> + if (csum != expected) {
> + pr_err("LZ4-compressed data is corrupt (content checksum)\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static ssize_t module_lz4_decompress(struct load_info *info,
> + const void *buf, size_t size)
> +{
> + const u8 *in = buf, *end = in + size, *desc;
> + size_t block_max, total = 0, dict_len = 0;
> + u64 content_size = 0;
> + u8 *scratch, *out;
> + bool linked;
> + u8 flg, bd;
> + ssize_t retval;
> +
> + if (size < 7 || get_unaligned_le32(in) != LZ4F_MAGIC) {
> + pr_err("not an lz4 compressed module\n");
> + return -EINVAL;
> + }
> +
> + desc = in + 4;
> + flg = desc[0];
> + bd = desc[1];
> + in = desc + 2;
> + if (FIELD_GET(LZ4F_FLG_VERSION, flg) != 1 ||
> + (flg & LZ4F_FLG_RESERVED) || (bd & LZ4F_BD_RESERVED) ||
> + FIELD_GET(LZ4F_BD_BLOCK_MAXSIZE, bd) < 4) {
> + pr_err("LZ4-compressed data has an unsupported frame descriptor\n");
> + return -EINVAL;
> + }
> + if (flg & LZ4F_FLG_DICT_ID) {
> + pr_err("LZ4-compressed data needs a dictionary\n");
> + return -EINVAL;
> + }
> + if (flg & LZ4F_FLG_CONTENT_SIZE) {
> + if (end - in < 8)
> + goto truncated_header;
> + content_size = get_unaligned_le64(in);
> + in += 8;
> + }
> + if (end - in < 1)
> + goto truncated_header;
> + if (*in != ((xxh32(desc, in - desc, 0) >> 8) & 0xff)) {
> + pr_err("LZ4-compressed data has a corrupt frame descriptor\n");
> + return -EINVAL;
> + }
> + in++;
> +
> + block_max = lz4f_block_max[FIELD_GET(LZ4F_BD_BLOCK_MAXSIZE, bd) - 4];
> + linked = !(flg & LZ4F_FLG_BLOCK_INDEP);
> +
> + scratch = kvmalloc((linked ? LZ4F_WINDOW_SIZE : 0) + block_max,
> + GFP_KERNEL);
> + if (!scratch)
> + return -ENOMEM;
> + out = scratch + (linked ? LZ4F_WINDOW_SIZE : 0);
> +
> + for (;;) {
> + u32 block_size;
> + size_t len;
> + int ret;
> +
> + if (end - in < 4)
> + goto truncated;
> + block_size = get_unaligned_le32(in);
> + in += 4;
> + if (!block_size)
> + break;
> +
> + len = block_size & ~LZ4F_BLOCK_UNCOMPRESSED;
> + if (len > block_max) {
> + pr_err("LZ4-compressed data has an oversized block\n");
> + retval = -EINVAL;
> + goto out;
> + }
> + if ((size_t)(end - in) < len +
> + (flg & LZ4F_FLG_BLOCK_CSUM ? 4 : 0))
> + goto truncated;
> +
> + if ((flg & LZ4F_FLG_BLOCK_CSUM) &&
> + xxh32(in, len, 0) != get_unaligned_le32(in + len)) {
> + pr_err("LZ4-compressed data is corrupt (block checksum)\n");
> + retval = -EINVAL;
> + goto out;
> + }
> +
> + if (block_size & LZ4F_BLOCK_UNCOMPRESSED) {
> + memcpy(out, in, len);
> + ret = len;
> + } else if (linked) {
> + ret = LZ4_decompress_safe_usingDict(in, out, len,
> + block_max,
> + out - dict_len,
> + dict_len);
> + } else {
> + ret = LZ4_decompress_safe(in, out, len, block_max);
> + }
> + if (ret < 0) {
> + pr_err("LZ4-decompression failed\n");
> + retval = -EINVAL;
> + goto out;
> + }
> +
> + retval = module_lz4_copy_out(info, out, ret, &total);
> + if (retval)
> + goto out;
> +
> + if (linked) {
> + /* Keep the last 64 KiB as the next block's dictionary. */
> + size_t keep = min_t(size_t, dict_len + ret,
> + LZ4F_WINDOW_SIZE);
> +
> + memmove(out - keep, out + ret - keep, keep);
> + dict_len = keep;
> + }
> +
> + in += len;
> + if (flg & LZ4F_FLG_BLOCK_CSUM)
> + in += 4;
> + }
> +
> + if (!total) {
> + pr_err("LZ4-compressed module is empty\n");
> + retval = -EINVAL;
> + goto out;
> + }
> +
> + if (flg & LZ4F_FLG_CONTENT_CSUM) {
> + if (end - in < 4)
> + goto truncated;
> + retval = module_lz4_verify_content(info, total,
> + get_unaligned_le32(in));
> + if (retval)
> + goto out;
> + in += 4;
> + }
> +
> + if (in != end) {
> + pr_err("LZ4-compressed module has trailing data\n");
> + retval = -EINVAL;
> + goto out;
> + }
> +
> + if ((flg & LZ4F_FLG_CONTENT_SIZE) && content_size != total) {
> + pr_err("LZ4-compressed data has a wrong content size\n");
> + retval = -EINVAL;
> + goto out;
> + }
> +
> + retval = total;
> + goto out;
> +
> +truncated:
> + pr_err("LZ4-compressed data is truncated\n");
> + retval = -EINVAL;
> +out:
> + kvfree(scratch);
> + return retval;
> +
> +truncated_header:
> + pr_err("LZ4-compressed data is truncated\n");
> + return -EINVAL;
> +}
> #else
> #error "Unexpected configuration for CONFIG_MODULE_DECOMPRESS"
> #endif

I think the module loader shouldn't implement an LZ4 frame decoder
itself. I'd expect that functionality to be provided by lib/lz4/ and the
module loader should only be a user of it.

The LZ4 block format implementation in lib/lz4/ is derived from the
original LZ4 code. Have you considered similarly adapting the original
LZ4 frame decoder instead of writing a new one?

--
Thanks,
Petr