Re: [PATCH v2 15/17] riscv: dts: spacemit: k3-pico-itx: enable the DisplayPort output
From: Cody Kang
Date: Wed Nov 18 2026 - 10:49:19 EST
Hi Icenowy, Guodong,
On Wed, 18 Nov 2026 14:25:38 +0800, Icenowy Zheng wrote:
> 在 2026-11-17二的 15:51 -0500,Guodong Xu写道:
> > On Thu, 03 Sep 2026 20:09:42 +0800, Icenowy Zheng wrote:
> > > The connector available on the Pico-ITX mainboard isn't a
> > > DisplayPort
> > > port -- it's a USB Type-C port instead.
> >
> > Right, it is a Type-C receptacle, and the commit message should say
> > so.
Agreed; v3 will say Type-C receptacle in the commit message.
> > > I think you need to model the Type-C port and alt functions of it.
> >
> > I am not sure that can be done on this board. The redriver/mux in
> > front of the receptacle and the PD controller that steers it both
> > sit on the EC's own I2C bus, and their interrupt goes to the EC too.
> > The SoC has no bus to either chip; all it gets from that side is the
> > DP1 HPD line.
>
> The ChromeOS EC firmware exposes some control for a Type-C port, you
> can search for `google,cros-ec-typec` and `google,extcon-usbc-cros-ec`
> compatible string in arch/arm64/boot/dts for more details.
>
> Although the K3 Pico ITX hardware connects the EC to the SoC with some
> not-so-embedded interface (eSPI), which needs to be handled first.
Thanks for the pointers, and thanks both for the review. With that, I
think in v3 I will leave the dp1_out endpoint unconnected, as it is in
v2. Let me know if you disagree.
Cody