Re: [PATCH 00/25] riscv: add support for the Metanoia MT2824 SoC and MT5824 EVB
From: Benoît Monin
Date: Wed Nov 18 2026 - 11:09:06 EST
On Tuesday, 17 November 2026 at 18:30:58 CET, Conor Dooley wrote:
> On Tue, Nov 17, 2026 at 11:41:52AM +0100, Benoît Monin wrote:
> > On Friday, 6 November 2026 at 12:15:09 CET, Mark Brown wrote:
> > > On Fri, Nov 06, 2026 at 10:29:57AM +0100, Benoît Monin wrote:
> > >
> > > > The series is organised as:
> > >
> > > > - patches 1-14 add the device tree bindings, the Metanoia vendor prefix,
> > > > the RISC-V board schema and the SoC block compatibles
> > > > - patch 15 adds ARCH_METANOIA and selects the AX45MP errata
> > > > - patches 16-23 add the reset, SPI, watchdog, MMC, PHY and USB changes
> > > > needed to build and probe on this SoC
> > > > - patch 24 adds the MT2824 SoC and MT5824 EVB device trees
> > > > - patch 25 adds the MAINTAINERS entry
> > >
> > > This sort of thing tends to work better if you submit the patches for
> > > subsystems as separate serieses, it avoids enormous CC lists and keeps
> > > the individual serieses a managable size.
> > >
> > I agree, and I am reworking the series that way. Version 1 was intended
> > as an overview of the complete SoC support, but it ended up being too
> > big for a single series.
> >
> > So version 2 of this current series will be only the platform basics
> > (2 patches):
> >
> > - dt-bindings: vendor-prefixes: add Metanoia Communications
>
> > - riscv: add ARCH_METANOIA Kconfig entry
>
> Realistically, this does not need to be a prereq either, because you'll
> have "depends on ARCH_METANIOA || COMPILE_TEST".
>
True but checkkconfigsymbols.py will then complain about a referenced but
undefined Kconfig symbol in the following series.
> >
> > It will act as a prerequisite for the following new series, one per
> > subsystem:
> >
> > - reset: binding + reset-simple support (the separate reboot binding
> > is dropped; the RST block is described as a single node)
> > - SPI: optional DMA/IRQ binding, MT2824 compatible, atcspi200 IRQ
> > support + Kconfig
> > - watchdog: compatible + Kconfig
> > - MMC: compatible + MT2824 support (split between SD, eMMC and
> > auto-detection) + tuning/HS400
> > - PHY: USB2 PHY binding + driver/Kconfig
> > - USB DWC2: binding + params
> >
> > Finally, once the subsystem bindings are accepted and the drivers
> > are queued, I'll post the SoC DTS in its own series: board schema +
> > cache/PLIC/PLICSW/PLMT compatibles + the MT2824/MT5824 DTS and the
> > MAINTAINERS entry
> >
> > Thanks everyone for the reviews, I will integrate the feedback in the
> > next iterations of each series.
> >
> > Best regards,
> > Benoît
> >
> >
> >
>