Re: [PATCH v3 2/3] arm64: dts: allwinner: add A733 SoC description
From: Alexander Sverdlin
Date: Wed Nov 18 2026 - 11:48:27 EST
Hi Enzo,
On Mon, 2026-11-09 at 23:45 -0500, Enzo Adriano wrote:
> Provide the SoC description needed for the Cubie A7S console, PMIC and
> microSD support. Describe the CPUs, PSCI, architectural timers, GIC,
> RTC, main and always-on clock/reset and pin controllers. Include the
> main and R-domain UART/I2C instances and MMC0-2 with their pin groups.
>
> The GIC maintenance PPI 9 and ARMv8.2 EL2 virtual-timer PPI 12 follow
> the A733 User Manual v1.00, section 12.2.3. The GICD/GICR/ITS windows
> and noncoherent attributes follow Andre Przywara's public A733
> reference and the A523 precedent. The CPUX interconnect diagram in
> section 5.1.2 supports noncoherency as an integration inference. The
> ITS stays disabled pending its clock/reset and MSI integration.
>
> The enabled console, R-I2C0/PMIC and MMC0 paths were exercised on a
> Cubie A7S with vendor firmware in the November 4 RAM boot of DT v2.
> EL2 interrupt delivery and ITS/MSI were not tested.
Shall parts of this go below "---" as history/changelog?
> Link: https://gist.githubusercontent.com/apritzel/60fd7379b9560a15b8b352986b69d39f/raw/efd9cdf8f26ba5b0c7e138f093af44a1cf322469/sun60i-a733.dts
> Signed-off-by: Enzo Adriano <enzo.adriano.code@xxxxxxxxx>
> ---
> .../arm64/boot/dts/allwinner/sun60i-a733.dtsi | 601 ++++++++++++++++++
> 1 file changed, 601 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi b/arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi
> new file mode 100644
> index 000000000000..d0b9f432e3ab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi
> @@ -0,0 +1,601 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +
> +#include <dt-bindings/clock/sun6i-rtc.h>
> +#include <dt-bindings/clock/allwinner,sun60i-a733-ccu.h>
> +#include <dt-bindings/clock/allwinner,sun60i-a733-r-ccu.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/reset/allwinner,sun60i-a733-ccu.h>
> +#include <dt-bindings/reset/allwinner,sun60i-a733-r-ccu.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + reg = <0x0>;
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu@100 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + reg = <0x100>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu@200 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + reg = <0x200>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu@300 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + reg = <0x300>;
> + enable-method = "psci";
> + };
> +
> + cpu4: cpu@400 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + reg = <0x400>;
> + enable-method = "psci";
> + };
> +
> + cpu5: cpu@500 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + reg = <0x500>;
> + enable-method = "psci";
> + };
> +
> + cpu6: cpu@600 {
> + compatible = "arm,cortex-a76";
> + device_type = "cpu";
> + reg = <0x600>;
> + enable-method = "psci";
> + };
> +
> + cpu7: cpu@700 {
> + compatible = "arm,cortex-a76";
> + device_type = "cpu";
> + reg = <0x700>;
> + enable-method = "psci";
> + };
Do we need capacity-dmips-mhz, cpu-map and two PMUs here, similar
to rk3588-base.dtsi? This in turn would mean ppi-partitions with
#interrupt-cells = <4> in GIC?
> + };
>