[PATCH v2] mtd: rawnand: abort BBT creation on scan failure

From: James Hilliard

Date: Wed Nov 18 2026 - 12:38:51 EST


A non-ECC error reading a factory bad block marker from OOB stops the
scan. check_create() ignores the error and can write the partial table
to flash as both the primary and the mirror. Both copies then list
unscanned factory-bad blocks as good.

Return the scan error before setting the table versions or writing
either copy.

Fixes: eeada24da8bd ("[MTD] NAND: Read only OOB bytes during bad block scan")
Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
Changes in v2:
- Explain how a partial scan can record bad blocks as good on flash.
- Link to v1: https://patch.msgid.link/20261103-submit-rawnand-bbt-scan-error-v1-v1-1-0bef8334198c@xxxxxxxxx
---
drivers/mtd/nand/raw/nand_bbt.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 93f162805f31..3ca1d7fe573f 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -1006,8 +1006,11 @@ static int check_create(struct nand_chip *this, uint8_t *buf,
continue;

/* Create the table in memory by scanning the chip(s) */
- if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
- create_bbt(this, buf, bd, chipsel);
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY)) {
+ res = create_bbt(this, buf, bd, chipsel);
+ if (res)
+ return res;
+ }

td->version[i] = 1;
if (md)

---
base-commit: 292f737382d3913d0d9addf220b7170fedd7a04f
base-tree: git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
change-id: 20261103-submit-rawnand-bbt-scan-error-v1-1183d881e5b2

Best regards,
--
James Hilliard <james.hilliard1@xxxxxxxxx>