Re: [PATCH net-next v4 01/10] dt-bindings: net: ti,dp83867: add supply properties

From: Rob Herring (Arm)

Date: Wed Nov 18 2026 - 13:59:13 EST



On Tue, 17 Nov 2026 14:15:21 +0530, Mohd Ayaan Anwar wrote:
> The DP83867 PHY has four distinct power supplies:
>
> VDDA2P5 -- 2.5V analog supply
> VDD1P0 -- 1.0V digital supply
> VDDA1P8 -- 1.8V analog supply
> VDDIO -- I/O supply, which can be 3.3V or 2.5V or 1.8V
>
> The DP83867E/IS/CS datasheet (section 8.3) describes two power supply
> configurations - "two-supply" and "three-supply".
>
> 1. Two-Supply Configuration: VDDA2P5 and VDD1P0 connected, and the
> VDDA1P8 pins are left unconnected.
> 2. Three-Supply Configuration: VDDA2P5, VDD1P0 and VDDA1P8 are all
> connected.
>
> VDDIO is a separate fourth supply present in both configurations. The
> datasheet specifies that it can either be 1.8V or 2.5V or 3.3V.
>
> Some embedded board design expose a GPIO-controlled regulator to control
> any one or more of these supplies. Therefore, document all four of the
> available supply properties.
>
> Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@xxxxxxxxxxxxxxxx>
> ---
> v4: This patch was accidentally dropped in v3. It has been re-added
> as-is from v2.
> ---
> Documentation/devicetree/bindings/net/ti,dp83867.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>

Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>