[PATCH net 4/4] ptp: ocp: correct the DCF output frequency
From: Ahmad Byagowi
Date: Wed Nov 18 2026 - 15:07:52 EST
The output selector table uses 77000 Hz for DCF, whereas the input table
and the DPLL supported frequency list use 77500 Hz. A request for the
advertised DCF77 frequency consequently fails on an output, and reading
that output reports a frequency outside its advertised set.
Use 77500 Hz for the DCF output selector as well.
Reported by the netdev Sashiko AI review and confirmed by code
inspection. Source-derived C regression tests pass with ASan/UBSan;
restoring the faulty selector, mask, disabled-state or DCF value makes
the corresponding regression fail. Tests use stubbed MMIO, not hardware.
The driver object builds on current net with W=1 and KCFLAGS=-Werror. No
physical card was tested.
Codex prepared the fix, tests and changelog from the review and upstream
source, at the request to separate common-driver fixes from WiWi support
and validate removal ordering.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Link: https://lore.kernel.org/r/179502617840.3136.12704245716223038161@xxxxxxxxxx
Signed-off-by: Ahmad Byagowi <ahmadexp@xxxxxxxxx>
---
drivers/ptp/ptp_ocp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 650047581f..aa950cae68 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -1376,7 +1376,7 @@ static const struct ocp_selector ptp_ocp_sma_out[] = {
{ .name = "GNSS1", .value = 0x0004, .frequency = 1 },
{ .name = "GNSS2", .value = 0x0008, .frequency = 1 },
{ .name = "IRIG", .value = 0x0010, .frequency = 10000 },
- { .name = "DCF", .value = 0x0020, .frequency = 77000 },
+ { .name = "DCF", .value = 0x0020, .frequency = 77500 },
{ .name = "GEN1", .value = 0x0040 },
{ .name = "GEN2", .value = 0x0080 },
{ .name = "GEN3", .value = 0x0100 },
--
2.54.0 (Apple Git-157)