Re: [PATCH v2 2/2] arm64: dts: allwinner: orangepi-zero2/zero3: Read the SPI NOR over two lines
From: Andre Przywara
Date: Thu Nov 19 2026 - 06:21:45 EST
Hi,
On 11/19/26 06:29, Arun Iyengar via B4 Relay wrote:
From: Arun Iyengar <aiyengar1990@xxxxxxxxx>
WP# and HOLD# are tied to VCC on the Zero2 (schematic v1.3), so read over
two lines. Andre Przywara pointed out that the Zero3 is the same.
Suggested-by: Andre Przywara <andre.przywara@xxxxxxx>
Signed-off-by: Arun Iyengar <aiyengar1990@xxxxxxxxx>
You can drop the Suggested-by:, as the whole thing was your idea, and I just suggested the move.
Feel free to add:
Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>
Tested-by: Andre Przywara <andre.przywara@xxxxxxx>
Cheers,
Andre
---
arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 646d92e0f724..4a588c44d029 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -110,6 +110,7 @@ flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
+ spi-rx-bus-width = <2>;
};
};