> I compile kenlel (2.2.11-4bk) with modile support.
> I have modules scsi_mod.0, sg.o and g_NCR5380.o
> (g_NCR5380 compile with MEMORY MAPPED MODE and ENABLE NCR53C400 EXTENTION)
>
> modprobe scsi_mod - OK
> modprobe sg - OK
>
> After insert module:
> modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xd4000 ncr_53c400=1
>
> a system showed me next message:
2.2.11 doesn't get the memory mapped modes on this card correct. I doubt 2.2.14 does
either. I don't have any memory mapped boards to test but 2.3.x should now get it
right.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jan 15 2000 - 21:00:20 EST