Hello,
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 385 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
(scsi0:0:0:0) Synchronous at 5.0 Mbyte/sec, offset 15.
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 8.
Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
(scsi0:0:2:0) Synchronous at 16.0 Mbyte/sec, offset 16.
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 2, lun 0 0x00 00 00 00 00 00
(scsi0:0:2:0) Performing Domain validation.
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 2, lun 0 0x00 00 00 00 00 00
(scsi0:0:2:0) reducing SCSI transfer speed due to Domain validation failure.
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 8.
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 0
(scsi0:0:4:0) Synchronous at 80.0 Mbyte/sec, offset 15.
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0
Vendor: IOMEGA Model: ZIP 100 Rev: E.08
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sdc at scsi0, channel 0, id 5, lun 0
scsi : detected 3 SCSI cdroms 3 SCSI disks total.
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.06
sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
SCSI device sda: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB]
sdc : READ CAPACITY failed.
sdc : status = 1, message = 00, host = 0, driver = 28
sdc : extended sense code = 2
sdc : block size assumed to be 512 bytes, disk size 1GB.
PCI latency timer (CFLT) is unreasonably low at 0. Setting to 32 clocks.
sdc is my external zip that I have put after the id 2, with an external connector),
Greg ICQ:16624071 mailto:greg@ulima.unil.ch
____________________________________________________________________
http://www.unil.ch/ima/docs/Personnes/gfavre
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jan 15 2000 - 21:00:22 EST