Hi,
I don't know what kernel you all are using or PCMCIA code revision
level. But, on my laptop with RH6.1 (2.2.12-20) and lastest PCMCIA
code, I too had problems with the modem on my CBEM56G-100 - I just
couldn't "talk" to the modem. On some other "message board" I found
the workaround:
% setserial /dev/modem irq 0 # switch to polling
% setserial /dev/modem irq 3 # back to interrupts
After doing this the modem works just fine! Hopefully this will
help you (or somebody else).
larry
> Not quite: getting the serial part to work might be tricky. I am trying
> to get it going with my Xircom RBEM56-100. As soon as that works i'll try
> the ISDN kit next (i happen to have one). As for the command set: i seem
> to have seen in the docs coming with the kit...
>
> Yours,
> Dominik
>
______________________________________________________________________
Larry Sendlosky ATS
larry@scrugs.lkg.dec.com (978) 506-6640 Compaq
----------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jan 23 2000 - 21:00:16 EST