Hi All,
Good luck getting Toshiba to update their firmware...
If you read the SCSI MultiMedia spec, you'll notice 6-byte Read/Write commands
are not mandatory (true for ATAPI & SCSI). So, I'd say the drivers need to be updated.
I seem to recall someone was updating drives to switch to 10-byte CDB's?
Regards,
Robin
Alan Cox wrote:
>
> > {"TOSHIBA","DVD-RAM SD-W1101","*", BLIST_GHOST},
> >
> > which doesn't implement it.
> >
> > What do we do?
> >
> > - Blacklist it as "doesn't support read-6" and implement
> > stuff to prevent read-6 if that flag is set?
>
> Is this ide-scsi. ATAPI does not require legacy command modes. If its atapi
> maybe ide-scsi isnt mapping right. If its real scsi then ask Toshiba for
> scsi firmware. Thats just too fundamentally screwy to bother with
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.rutgers.edu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jan 23 2000 - 21:00:26 EST