I have just taken the 2.3.x plunge and have found my machine to work all
except the Tulip driver.
I am running Redhat 6.1 and it says "Delaying eth0 initialization" on
boot. If I "ifup eth0" it says the same thing. I used to get this if I
didn't have the module loded / aliased in conf.modules.
conf.modules has the line
alias eth0 tulip
I decided to insmod the module to see what would happen. It insmoded fine
so I figured I'd bring it up "ifup eth0" What happened next... here it
is...
wait_on_irq, CPU0:
irq:1 [0 1]
bh:0 [1 0]
<[c010dd0d]> <[c016ce24]> <[c011e84d]>
NMI watchdog detected LOCKUP on CPU1,
registers:
CPU:1
EIP:0010:[c0114027]
EFLAGS:00000006
eax:c8802000 ebx:00000000 ecx:00000024 edx:0001001e esi:c8802030
edi:0000fffa ebp:00000075 esp:c7983f0c
ds:0018 es:0018 ss:0018
Process syslogd (Pid:279, stackpage=c7983000)
stack:02000cff 02000cff 0000ffff 00000009 c011420d c127e260
24000001 00000004 c010ded8 00000009 c8802030 c7983f70
c0325920 00000009 c127e260 c7983f68 c010e284 00000009
c7983f70 c127e260 00000009 dffff908 bffffd09 bffffd1c
call trace: [<c011420d>] [<c010ded8>] [<c8802030>] [<c010e284>]
[<c010c2d8>] [<c01983d7>] [<c010c230>]
code: c1 eb 08 41 39 e9 7c f1 83 7e 54 00 74 22 8a 46 5d c0 e8 01
Is there an easy way to copy this down! Sheesh thats a lot of typing!
The Machine is:
2xPII 350mhz
128 Meg of PC100 ECC
American Micro P6DBU
New stuff turned on in kernel:
ACPI
USB (All Modular and not loaded at the time)
I2c (All Modular and not loaded at the time)
lm_sensors 2.4.5
Sensors (All Modular and not loaded at the time)
I have the config around if you need more info...
Other things I noticed:
Matroxfb (using matrox:vesa:0x11E) no longer works - drops to 640x480
console
NTFS w/write support does not compile into kernel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Feb 15 2000 - 21:00:17 EST