Hello,
I'm soon giving up trying to get some packets go through a shaper device.
Alan or someone else who knows, is it really in a working state in 2.2.14?
This is one of the most straight variations that I've tried:
$ ifconfig eth1 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255
$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
$ # ping some other host on that net:
$ ping -c 1 192.168.0.2
PING 192.168.0.2 (192.168.0.2): 56 data bytes
64 bytes from 192.168.0.2: icmp_seq=0 ttl=64 time=0.3 ms
--- 192.168.0.2 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 0.3/0.3/0.3 ms
$ shapecfg attach shaper0 eth1
$ shapecfg speed shaper0 64000
$ ifconfig shaper0 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255
$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 shaper0
$ # Remove the eth1 route (ifconfig really sucks):
$ route del -net 192.168.0.0 netmask 255.255.255.0 dev eth1
$ ping -c 1 192.168.0.2
PING 192.168.0.2 (192.168.0.2): 56 data bytes
--- 192.168.0.2 ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
$
This is on a clean Debian 2.1r4 box using a plain 2.2.14 linux kernel.
Here is the .config:
CONFIG_EXPERIMENTAL=y
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_1GB=y
CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_OLD_PROC=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_PARIDE_PARPORT=y
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_SKB_LARGE=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_EISA=y
CONFIG_DEC_ELCP=y
CONFIG_SHAPER=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NLS=y
CONFIG_VGA_CONSOLE=y
Best Regards
Daniel Ryde, System Administrator
__________________________________________________________________________
Tripnet AB Visit Address: Telephone: +46 31 7252500
Box 5071 Avagen 42 Facsimile: +46 31 7252501
S-402 22 GOTEBORG GOTEBORG Email: ryde@tripnet.se
Sweden Sweden
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:30 EST