Hi,
> With the most recent kernels (I think 2.3.47-2.3.50), I keep getting
> an infinite loop in the SCSI initialization phase. lspci returns this
> for the controller:
>
> 01:04.0 SCSI storage controller: Symbios Logic Inc. (formerly
> NCR) 53c895 (rev 02)
>
> My system is an ES40 (Quad 500MHz 21264 Alphas, tsunami chipset).
> Here is the error I'm getting while booting up:
>
> sym53c8xx_reset: pid=0 reset_flags=2 serial_number=2 serial_number_at_timeout=2
> sym53c895-0: resetting, command processing suspended for 2 seconds
> sym53c895-0: command processing resumed
> SCSI host 0 abort (pid 0) timed out - resetting
> SCSI bus is being reset for host 0 channel 0.
>
> ....
Same problem here: ruffian board, single-cpu, linux-2.3.99pre3
I tried the sym53c8xx and the ncr53c8xx driver with various compile time
options set and unset with no success.
There is no (scsi related) problems with linux-2.3.34 ....
I've found nothing on l-k and I'm not subscribed on linux-alpha. Is there
allready any bugfix or workarround?
yours,
- clifford
--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Clifford Wolf ................ www.clifford.at ICQ: 60702100
The ROCK Projects Workgroup .. www.rock-projects.com Tel: +43-699-10063494
The ROCK Linux Workgroup ..... www.rocklinux.org Fax: +43-2235-42788-4
The NTx Consulting Group ..... www.ntx.at email: god@clifford.at
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Apr 07 2000 - 21:00:07 EST