Hi Andrew,
> Kernel 2.2.15-pre9 on a dual processor BP6. HPT366 controller, latest
> BIOS, UDMA drives on the second IDE controller (hde, hdf). CDROM on the
> primary (hda).
>
> When the kernel is built for SMP it comes up with "ide2: Disabled unable
> to get IRQ -11". No root fs.
>
> The same kernel works fine when built for UP. 2.3.99 works OK both UP
> and SMP.
There is a BIOS available for the Abit BP6 which allows you to disable the
resource allocation for the HPT366 controller. It was never released as a
production BIOS, however remains available as a beta BIOS.
I suggest flashing a current, production (eg rev QQ) if this is the case.
Also, ensure IRQ sharing is enabled in the config.
- Dan
__________________________
Daniel J Blueman
Undergraduate - BSc Computing Science
UMIST university - Manchester
Direct line: 0161 933 3569
Mobile: 07775 583766
Email: daniel.j.blueman@stud.umist.ac.uk
SMS: daniel.j.blueman@sms.genie.co.uk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Apr 07 2000 - 21:00:07 EST