Hi,
I've made a tool to help detection of hardware/configuration to help the
new user to configure the kernel.
How it work:
1) it check the hardware and driver needed and set the configuration. It
check the /proc tree, the dmesg and lspci (with /proc/pci)
2) it use old .conf or arch/*/defconfig to suply defaults
3) user should rerun a configuration tool and checks the non-detected /
non-detectable configurations
To do:
1) bettere CPU detection (with the best configuration)
2) special configurations for non i386 arch
3) net configuration (not devices)
4) add extra ISA and UBS devices (soundcards, net...)
5) add the rest of PCI (I'm working on that)
What it don't do:
1) Set driver to hard code (not modules)
2) Check /dev/ (to detect non installed driver in a non detectable bus
(not ISA-PnP, not PCI,...)
Files are in
http:/n.ethz.ch/student/gmiabla/autodetect
autodetect-0.6 is the actual version (to put in /linux/scripts/)
Linux-Makefile.diff is the patch to /linux/Makefile
make autodetect it would check hardware (Warning: it make the .config
dirt)
or bash script/autodetect it write the detected hardware on stdout.
Comments? Additions?
giacomo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Apr 07 2000 - 21:00:11 EST