Re: PROBLEM: Linux SCSI Reset With Tekram DC390-U2W and NCR/SYM Drivers

From: Richard Gooch (rgooch@ras.ucalgary.ca)
Date: Sun Apr 23 2000 - 13:42:13 EST


groudier@club-internet.fr writes:
>
>
> On Sat, 22 Apr 2000, Evan DiBiase wrote:
>
> > [1.] One line summary of the problem: Linux resets the SCSI bus fairly often
> > with the Tekram DC390-U2W.
>
> `Summary' should not be a synonym of `bare claim'. Such a statement
> is probably untrue given the great success of this controller under
> Linux.

I'd have to agree. I've installed 5 DC390-U2W cards in different
machines since September, and they're solid. I use the sym53c8xx
driver. I also appreciate that Tekram provide generous accessories
with the card (twisted-pair U2W cable, flat UW cable, flat U cable,
U2W terminator) plus lots of connectors. It's nice not to have to shop
around separately for these.

                                Regards,

                                        Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Apr 23 2000 - 21:00:22 EST