After a long time I've decided to try an unstable kernel (2.3.99-pre9) but
it oops on boot (probably beacuse of the scsi card). Here follows the
Oops:
Unable to handle kernel paging request at virtual address 5a5a5a66
printing eip:
c01c2213
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01c2213>]
EFLAGS: 00010812
eax: 5a5a5a5a ebx: c7fb2130 ecx: c7fb2000 edx: 00000000
esi: c7ff8400 edi: c7fb2080 ebp: c7f68320 esp: c02a1ef4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c02a1000)
Stack: 0080c020 c7f68320 c7fb2080 c7fb2130 c01c1b82 c7fb2080 c7f68320
c7fb2130
0080c020 c7fb2080 0000000b 00000282 00000001 c01c0e4e c7fb2080
c7f6d8a0
04000001 0000000b c02f1840 00000020 c010f0bb 00000082 80000000
c010c304
Call Trace: [<c01c1b82>] [<c01c0e4e>] [<c010f0bb>] [<c010c304>]
[<c010c46e>] [<c0110fec>] [<c8802080>]
[<c0109030>] [<c010b594>] [<c0110fec>] [<c8802080>] [<c0109030>]
[<c011120a>] [<c0110fec>] [<c0109030>]
[<c0109099>] [<c0105000>] [<c010018d>]
Code: 39 58 0c 74 08 8b 40 0c 39 58 0c 75 f8 89 50 0c 3b 5d 2c 75
Aiee, killing interrupt handler
Passed through ksymoops it becomes:
>>EIP; c01c2213 <dc390_SRBdone+3ab/3f8> <=====
Trace; c01c1b82 <dc390_Disconnect+11e/12c>
Trace; c01c0e4e <do_DC390_Interrupt+e2/194>
Trace; c010f0bb <timer_interrupt+5f/108>
Trace; c010c304 <handle_IRQ_event+34/60>
Trace; c010c46e <do_IRQ+6e/b4>
Trace; c0110fec <acpi_idle+0/22c>
Trace; c8802080 <END_OF_CODE+8502890/????>
Trace; c0109030 <default_idle+0/28>
Trace; c010b594 <ret_from_intr+0/20>
Trace; c0110fec <acpi_idle+0/22c>
Trace; c8802080 <END_OF_CODE+8502890/????>
Trace; c0109030 <default_idle+0/28>
Trace; c011120a <acpi_idle+21e/22c>
Trace; c0110fec <acpi_idle+0/22c>
Trace; c0109030 <default_idle+0/28>
Trace; c0109099 <cpu_idle+41/54>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c010018d <L6+0/2>
Code; c01c2213 <dc390_SRBdone+3ab/3f8>
00000000 <_EIP>:
Code; c01c2213 <dc390_SRBdone+3ab/3f8> <=====
0: 39 58 0c cmp %ebx,0xc(%eax) <=====
Code; c01c2216 <dc390_SRBdone+3ae/3f8>
3: 74 08 je d <_EIP+0xd> c01c2220
<dc390_SRBdone+3b8/3f8>
Code; c01c2218 <dc390_SRBdone+3b0/3f8>
5: 8b 40 0c mov 0xc(%eax),%eax
Code; c01c221b <dc390_SRBdone+3b3/3f8>
8: 39 58 0c cmp %ebx,0xc(%eax)
Code; c01c221e <dc390_SRBdone+3b6/3f8>
b: 75 f8 jne 5 <_EIP+0x5> c01c2218
<dc390_SRBdone+3b0/3f8>
Code; c01c2220 <dc390_SRBdone+3b8/3f8>
d: 89 50 0c mov %edx,0xc(%eax)
Code; c01c2223 <dc390_SRBdone+3bb/3f8>
10: 3b 5d 2c cmp 0x2c(%ebp),%ebx
Code; c01c2226 <dc390_SRBdone+3be/3f8>
13: 75 00 jne 15 <_EIP+0x15> c01c2228
<dc390_SRBdone+3c0/3f8>
I'm trying to compile without the DC390 driver in
Bye
Gianluca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:11 EST