LinkSys EtherFast 10/100 v4 in 2.2.15?

From: Jacob Luna Lundberg (jacob@velius.chaos2.org)
Date: Mon May 29 2000 - 15:13:10 EST

I just got a bunch of LinkSys EtherFast 10/100 lan cards (going off the
"Tested with LINUX" sticker on the front ;) and they don't seem to work
under 2.2.15. I tried both the new and old tulip drivers and also the
Generic DECchip driver, but none of them detect the card. I just
downloaded 2.4.0-test1-ac4 and it works just fine (network anyway). So is
this a known issue? Or am I just missing some little thing to make the
card work in 2.2.15?

Thanks,
-Jacob 

-- 

"
4.     Disabling inet domain sockets will limit risk to the local machine.

5.     Use step 4 and if the problem persists and is not secondary to a rogue program/daemon  get
       a  3.5  ft  (approx. 1 meter) length of sucker rod* and have a chat with the user in ques-
       tion.

       Sucker rod def. -- 3/4, 7/8 or 1in. hardened steel rod, male threaded on each  end.   Pri-
       mary  use  in  the oil industry in Western North Dakota and other locations to pump 'suck'
       oil from oil wells.  Secondary uses are for the construction of cattle feed lots  and  for
       dealing with the occasional recalcitrant or belligerent individual.
"
-From the man page for syslogd v1.3

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:22 EST