> > > Offboard or ADD-ON cards are the issue ONLY........
> >
> > Level triggered IRQ
>
> Exact point, if I could force all interrupts to "Edge Triggered IRQ", I
> could verify and prove the case...any ideas Alan?
If they are not shared I think you can force it. You'll need to program
the IDE board for edge triggered irq versus level, and the APIC chip - the
APIC parts of it are documented in the PIII manual and IO APIC databook
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:24 EST