elevator.c warnings?

From: Matthew Dharm (mdharm-kernel@one-eyed-alien.net)
Date: Tue May 30 2000 - 13:46:27 EST

I just installed a DAC960PD RAID controller. Whenever I attempt to access
it hard (eg big grep, rsync, etc.) the following messages starts spewing to
the console -- I'm not sure what's causing them, but the messages seem to
be coming out of drivers/block/elevator.c

30:01: elevator read_pendings -2 should be 0
30:01: elevator nr_segments 0 should be 2
30:01: elevator read_pendings 2 should be 1
30:01: elevator nr_segments 9 should be 8
30:01: elevator read_pendings 2 should be 1
30:01: elevator nr_segments 5 should be 4
30:01: elevator read_pendings -1 should be 0
30:01: elevator nr_segments 3 should be 4
30:01: elevator read_pendings -1 should be 0
30:01: elevator nr_segments 1 should be 2
30:01: elevator read_pendings 3 should be 1
30:01: elevator nr_segments 3 should be 1
30:01: elevator read_pendings -1 should be 0
30:01: elevator nr_segments 0 should be 1
30:01: elevator read_pendings 2 should be 1
30:01: elevator nr_segments 12 should be 11

This is on 2.4.0-test1, but I've been seeing messages like this for the
last several kernels.

Matt Dharm 

-- 
Matthew Dharm                              Home: mdharm@one-eyed-alien.net 
Senior Engineer, QCP Inc.                            Work: mdharm@qcpi.com

I'm a pink gumdrop! How can anything be worse?!!
					-- Erwin
User Friendly, 10/4/1998

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:25 EST