System:
Athlon 650, ABit KA7 Mainboard, 3 HPT366 controller, 4 IBM-DTLA-307045
drives as hd[e-i,m], 1 FUJITSU MPF3204AT:
May 31 21:09:15 obelix kernel: hda: FUJITSU MPF3204AT, ATA DISK drive
May 31 21:09:15 obelix kernel: hdc: PLEXTOR CD-R PX-W8432T, ATAPI CDROM
drive
May 31 21:09:15 obelix kernel: hde: IBM-DTLA-307045, ATA DISK drive
May 31 21:09:15 obelix kernel: hdg: IBM-DTLA-307045, ATA DISK drive
May 31 21:09:15 obelix kernel: hdi: IBM-DTLA-307045, ATA DISK drive
May 31 21:09:15 obelix kernel: hdm: IBM-DTLA-307045, ATA DISK drive
May 31 21:09:15 obelix kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 31 21:09:15 obelix kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 31 21:09:15 obelix kernel: ide2 at 0xa400-0xa407,0xa802 on irq 12
May 31 21:09:15 obelix kernel: ide3 at 0xb000-0xb007,0xb402 on irq 12
May 31 21:09:15 obelix kernel: ide4 at 0xbc00-0xbc07,0xc002 on irq 12
May 31 21:09:15 obelix kernel: ide6 at 0xd400-0xd407,0xd802 on irq 10
All drives run in UDMA mode2 (If the IBM disk are in mode 4 as is the
default, the system is even more unstable)
The machine locks (Alt SysRq works but nothing else) when copying much data
from the hde-i RAID-0 to /hda
When I only use /dev/hda, the system is rather stable (kernel compiling etc
works)
Nils
-- Plug-and-Play is really nice, unfortunately it only works 50% of the time. To be specific the "Plug" almost always works. --unknown source
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:28 EST