Re: 2.4.0-test1ac7 boot failure (2.4.0-test1 OK)

From: Jeff Garzik (jgarzik@pobox.com)
Date: Thu Jun 01 2000 - 13:38:20 EST

Next message: dLux: "[patch] Bad RAM patch 0.1 for 2.4.x series"
Previous message: Jeff Garzik: "Re: [linux-fbdev] Re: VGA and pci_enable_device (was Re: Linux 2.4.0test1-ac6)"
In reply to: nbecker@fred.net: "2.4.0-test1ac7 boot failure (2.4.0-test1 OK)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 31 May 2000 nbecker@fred.net wrote:

> Like the subject says, 2.4.0-test1 is OK, but 2.4.0-test1-ac7 hangs on
> boot.
>
> It's booting a basically RH6.2 system
>
> It stops at "searching for new hardware..."

hmmm. That's kudzu, doing hardware detection. Disable it in 'ntsysv'
and see if you can boot, at least..

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: dLux: "[patch] Bad RAM patch 0.1 for 2.4.x series"
Previous message: Jeff Garzik: "Re: [linux-fbdev] Re: VGA and pci_enable_device (was Re: Linux 2.4.0test1-ac6)"
In reply to: nbecker@fred.net: "2.4.0-test1ac7 boot failure (2.4.0-test1 OK)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Jun 07 2000 - 21:00:13 EST