Hi,
I have an Adaptec 78880 and have been using 2.3.99-pre8 for a while,
since the subsequent kernels failed to compile until 2.4.0-test1-ac8
(saying something about some variable breaking its restraints, and it
points to some file locking code). However, when booting test1-ac8 or
test1-ac9, I get the following messages:
scsi : aborting command due to timeout: pid 0, scsi 0, channel 0, id 0,
lun 0, inquiry 00 00 00 FF 00
SCSI bus is being reset for host 0 channel 0
SCSI host 0 abort (pid 0) timed out - resetting
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0
SCSI host 0 abort (pid 0) timed out - resetting
[the last two messages repeat infinitely]
Any ideas what's going on?
Cheers,
Jason
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jun 07 2000 - 21:00:26 EST