I have been trying to get the 2.4 series of kernels
running on the i-opener to no avail. Here is what I am
getting:
o It boots fine and detects the ide controller and sets the
bus speed to 33MHz.
o It then detects both hda and hdb, hda is a quantum 127AT go drive,
hdb is the sandisk 16MB compact flash.
o It then goes to do the partition check and pauses for a few seconds
and only shows the partitions of hdb (the flash).
What could be causing this? Since it cant find hda it cant boot
so I have no way to get any logs or anything. It works fine with
2.2.14 so it must be some sort of change in the ide drivers.
I would stick with 2.2.14 but I need the new pegasus driver that
is in 2.4. Any help greatly appreciated!
Thanks,
Mike Panetta
--- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:34 EST