Compiling Linux 2.2.16+ with Dell Proprietary PERC 3/Si Raid Device

From: Byron Stanoszek (gandalf@winds.org)
Date: Wed Jun 14 2000 - 12:34:40 EST

I have a couple of Dell PowerEdge 4350 computers with a PERC 3/Si raid
controller installed as the boot device. I know about Dell's website that has
a binary-only version of their percraid.o module, but they provide no means
of upgrading this kernel to 2.2.15 or 2.2.16 while using the same binary
driver.

Is there any chance that anyone is working on an open-source driver that can
be included into the kernel to enable support for this device in the future?

Any help is appreciated. 

---
Byron Stanoszek                         Ph: (330) 644-3059
Systems Programmer                      Fax: (330) 644-8110
Commercial Timesharing Inc.             Email: bstanoszek@comtime.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:34 EST