Hello,
Last night, a Netfinity 5500 box panicked with the following messages
(copied off the console screen):
scsi: aborting command due to timeout: pid 16329, scsi1, channel 0, id 5,
lun 0, Test Unit Ready 00 00 00 00 00
(scsi1) BRKADRINT error (0xff):
Illegal Host Access
Illegal Sequencer Address Referenced
Illegal Opcode in sequencer program
Scequencer Ram Parity Error
Data-Path Ram Parity Error
Scratch Ram/SCB Array Ram Parity Error
PCI Error detected
CIOBUS Parity Error
(scsi1) SEQADDR=0x1ff
kernel panic: aic7xxx: unrecoverable BRKADRINT.
In swapper task - not syncing
The Netfinity contains an onboard ServeRaid II controller and a PCI Adaptec
2940 AU, because the tape didn't work while connected to scsi0, channel 1
on the 2nd channel of the ServeRaid controller.
I don't know when this panic came about, the last log message came from
ArcServeIT 6.61 for Linux, which came hourly before, last one at 22.02 CEST,
no other messages. There were no backups scheduled at this night at all,
so I do not know what ArcServe could have done to the tape.
Any help with the problem is welcome, because I'd like to understand why
this happened. If you have more questions, please ask, I'll try to answer
them.
Many thanks in advance,
Reinhold Huber
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jul 15 2000 - 21:00:16 EST