Hi,
Inserting a PCMCIA card under linux-2.4.0-test5-pre3 results in a solid
hang. I've tried it with a Xircom ethernet+modem card and an IBM
microdrive, and both cards succesfully lock the complete system in such a
way that only a hard reset helps. I had to enable CONFIG_I82365 by hand to
enable i82365 support (for some reason this is commented out in
drivers/pcmcia/Config.in).
More infomation:
ASUS P6300 notebook, Mobile Pentium II 266MHz, 80MB RAM, 6GB disk.
The system runs SuSE Linux 6.4 with all upgrades applied.
Output from ver_linux script (on a linux-2.4.0-test4 system):
Kernel modules 2.3.9
Gnu C 2.95.2
Binutils 2.9.5.0.24
Linux C Library x 1 root root 4060704 Apr 28 02:10 /lib/libc.so.6
Dynamic linker ldd (GNU libc) 2.1.3
Procps 2.0.6
Mount 2.10f
Net-tools 1.54
Kbd 0.99
Sh-utils 2.0
Modules Loaded ide_cs serial_cs xirc2ps_cs snd-pcm-oss
snd-pcm-plugin snd-mixer-oss ds i82365 pcmcia_core snd-card-opl3sa2
snd-cs4231 snd-pcm snd-mixer snd-mpu401-uart snd-rawmidi snd-seq-device
snd-opl3 snd-hwdep snd-timer snd soundcore mousedev hid input usb-uhci
usbcore autofs irtty irda serial ide-cd cdrom
Output from "cardclt ident":
Socket 0:
product info: "Xircom", "CreditCard Ethernet 10/100 + Modem 56", "CEM56", "1.00"
manfid: 0x0105, 0x110a
function: 2 (serial)
Socket 1:
product info: "IBM", "microdrive"
manfid: 0x00a4, 0x0000
function: 4 (fixed disk)
Erik
-- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A.K.Mouw@its.tudelft.nl WWW: http://www-ict.its.tudelft.nl/~erik/- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 23 2000 - 21:00:13 EST