rtl8139 with 2.2.15

From: Manuel Lindauer (manuellindauer@gmx.net)
Date: Sat Aug 26 2000 - 01:51:43 EST


Hi,
i have a little problem with my ethernet card. i use a nic with the
rtl8139 chip, and under heavy load i sometimes get the following
messages in /var/log/messages and after this the nic doesn't work for
1 or 2 seconds, but then i can use it as usual. I have a dual celeron
system with kernel 2.2.15. I hope you can help. I think this problem isn't so big but
it's a little bit annoying sometimes.

/var/log/messages:
--------------------------------------------
Aug 25 22:51:32 gw1 kernel: eth0: Transmit timeout, status 0d 0000 media 00.
Aug 25 22:51:32 gw1 kernel: eth0: Tx queue start entry 84083 dirty entry 84083.
Aug 25 22:51:32 gw1 kernel: eth0: Tx descriptor 0 is 8022a03c.
Aug 25 22:51:32 gw1 kernel: eth0: Tx descriptor 1 is 8022a03c.
Aug 25 22:51:32 gw1 kernel: eth0: Tx descriptor 2 is 8022a03c.
Aug 25 22:51:32 gw1 kernel: eth0: Tx descriptor 3 is 8022a03c. (queue head)
Aug 25 22:51:32 gw1 kernel: eth0: MII #32 registers are: 1000 782d 0000 0000 01e1 40a1 0001 0000.
--------------------------------------------

Yours,
Manuel Lindauer <manuellindauer@gmx.net>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 31 2000 - 21:00:17 EST