PCI bridge problems?

From: M.Stein (matthias@gom.com)
Date: Tue Aug 29 2000 - 09:30:21 EST


Hello!

It seems, that we have problems with the resource allocation of some cards
behind a 21152 bridge. The 2.4.0-test1 kernel gives the following messages
during startup:

PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
PCI: Cannot allocate resource region 1 of device 02:0d.0
PCI: Cannot allocate resource region 2 of device 02:0d.0
PCI: Cannot allocate resource region 0 of device 02:0e.0
PCI: Cannot allocate resource region 1 of device 02:0e.0
PCI: Failed to allocate resource 2 for PCI device 112f:0004 (Imaging
Technology
Inc)
PCI: I/O Region 02:0e.0/0 too large (12288 bytes)
PCI: I/O Region 02:0e.0/0 too large (12288 bytes)
PCI: Failed to allocate resource 0 for 3Com Corporation 3c905C-TX [Fast
Etherlink]
PCI: Failed to allocate resource 1 for 3Com Corporation 3c905C-TX [Fast
Etherlink]
PCI: BIOS reporting unknown device 02:60
PCI: Device 02:68 not found by BIOS
 
I have attached some lspci (-t) (-v) (-v -b) output.

If this is not the right place to ask, I apologize and hopefully someone
can give me some hints, WHERE to ask for help.

Thank's

                                        matthias

-------------------------------------------------------------------------------
GOM mbH Tel.: ++49 531/3804-330
Gesellschaft fuer optische Messtechnik Fax.: ++49 531/3804-333
Rebenring 33 Mail: M.Stein@gom.com
38106 Braunschweig GERMANY http://www.gom.com
-------------------------------------------------------------------------------







-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 31 2000 - 21:00:23 EST